Beauty and Innovation Merged in One Creation

The new PH-10 isn’t any ordinary phono pre-amplifier and you can tell engineered to allow ultra-precise adjustments and let you enjoy the best out of your system and with two separate RCA inputs you will be able to connect independently two different tonearms and tune it to match each cartridge specs. Once the tonearm is connected, PH-10 can be adjusted with 4 different GAIN levels [-3dB, 0dB, +3dB, 6dB] to match precisely the output level of any MM or MC cartridge. The perfect setup is guaranteed with 9 different load options – 10Ω, 22Ω, 47Ω, 100Ω, 220Ω, 470Ω, 1000Ω, 22KΩ, 47KΩ. Select between 3 equalization curves and experience outstanding performances. You will finally be able to switch from the internationally recognized RIAA curve to the DECCA-LONDON or the AMERICAN-COLUMBIA curve, always graphically shown on the front display. And there’s more because you will also be able to “enhance” each curve with a modern Gold Note proprietary design for superior dynamic and powerful results. Built from a solid block of machined aluminum and designed to elegantly cool the sophisticated electronics. PH-10 shows every detail on its 2,8” colour display and everything is powered by Gold Note proprietary SKC – Single Knob Control technology – an intuitive control system developed to easily browse and select all the unit’s functions. PH-10 comes with a USB port to quickly update the unit via computer anytime new software is available. The unit can be externally powered by a dedicated inductive dual-mono power supply to enhance even more the audio performance. Front Panel and Case: Brushed anodized aluminum available in three colours.

The PSU10

together with its massive power supply, enables the PH10 phono stage being electro-magnetic shielded and insulated from the AC power system. The large ultra-clean power enhances super low noise, greater dynamic, better resolution and details guaranteeing a more realistic high-end audio performance. Front Panel and Case: Brushed anodized aluminum available in three colours:

https://classicsound.ca/product/gold-note-psu-10/

Technical

• Phono Pre-amplifier with SKC and TFT colour display
• Equalization Curve control: 3 selectable curves [RIAA – Decca-London – American-Columbia] with an enhanced option for each
• Subsonic filter: 10Hz/36db octave
• Frequency response: 2Hz – 200KHz @ +/- 0.3dB
• THD (Total Harmonic Distortion): <0.005% MAX
• Signal to noise ratio: -89dB
• Dynamic response: 105dB
• Output impedance: 50Ω
• Phase response: linear phase, absolute phase inverted
• Weight: 4Kg
• Dimensions: 220mm L | 80mm H | 260mm D

Power

• Main supply: 100V to 245V ▪ 50/60Hz (depending on market destination, not convertible)
• Power consumption: 30W super linear power supply

Audio Outputs

• Line output level (fixed): stereo RCA @ 2Volt and balanced XLR @ 4Volt

Audio Inputs

• Analogue inputs: 2 separate independent stereo RCA
• Input capacitance MM: 220pF
• Input sensitivity: 0.1mV MC up to 7.0mV MM
• Input impedance: 9 selectable options [10Ω 22Ω 47Ω 100Ω 220Ω 470Ω 1000Ω 22KΩ 47KΩ]
• Gain: 65dB MC – 45dB MM with 4 options [-3dB 0dB +3dB +6dB]